Authentication Flow API

API reference detailing all endpoints, inputs and results supported by the Authentication Flow API.

Welcome to the API reference for the Authentication Flow API. On this page, you'll find a complete list of all the actions supported by the API.

For an overview of what the Authentication Flow API is, see this post here.

1.0 Introduction

This section of the API reference documentation covers the following:

Endpoints
How to make your first HTTP request to the authentication flow endpoint.
Authentication Flow Types
How state token works
API inputs and responses

1.1 Endpoints

The Authentication Flow API has two endpoints. The endpoints are:

/api/v1/authentication_flows : This endpoint can be used to initialize a new authentication flow. Or to perform a flow that requires just one step/HTTP request to finish.
/api/v1/authentication_flows/states/input: This endpoint requires a state_token parameter in the request body. The value for the state_token parameter must be a valid state token gotten from a previous step/request to the Authentication Flow API.

Both endpoints only support requests made over HTTPS using the POST method. Requests made over plain HTTP will be refused. The supported content type for the request is application/json.

1.2 Create a New Authentication Flow

The first step for using the Authentication Flow API is to create a new authentication flow.

What is an Authentication Flow?

An authentication flow basically starts with an HTTP request to the /api/v1/authentication_flows endpoint. The endpoint will respond with data such as a state_token and an action object that will determine what the next step (request) will be executed. The action object returns different values for its own type property (action.type) which include: identify, authenticate, verify, finish_redirect_url, etc.

At the minimum, this step involves sending an HTTP request to the Authentication Flow API endpoint with the type and name parameters in the request body.

HTTP Request:

Here's a sample of what the HTTP request to create a new flow of "type": "login" will look like this:

POST /api/v1/authentication_flows
Content-Type: application/json

{
  "type": "login",
  "name": "default"
}

The above code block shows how the structure of a typical HTTP request to the Authentication Flow API should be configured. Here's a breakdown of all the different parts of the request:

The API expects a POST request sent over HTTPS.
The endpoint to make an HTTP request to is /api/v1/authentication_flows. An example of the full endpoint is https://{your-project.authgear.cloud}/api/v1/authentication_flows. Replace {your-project.authgear.cloud} with the valid domain name for your Authgear project.
Always set the request content type as Content-Type: application/json as the API only accepts inputs as JSON.
The JSON object containing values for type and name can then be passed in the request body.
The type parameter defines the authentication flow type while the name parameter can be set to "default".

HTTP Request for a Single-Step Authentication Flow:

The following section shows an example request for a single-step authentication flow that uses the phone number + password login method.

The Authentication Flow API supports the multiple login methods that you can enable for your project on the Authgear Portal. Hence, to use a single-step authentication flow like in the example below, ensure that the phone number + password login method is enabled and the user has it enabled for their account.

POST /api/v1/authentication_flows
Content-Type: application/json

{
  "type": "login",
  "name": "default",
  "batch_input": [
        {
            "identification": "phone",
            "login_id": "+44123344556"
        },
        {
            "authentication": "primary_password",
            "password": "12345678"
        }
    ]
}

Example:

The following are examples of how to make an HTTP request to the API to start a login flow from your code:

const express = require('express');
const axios = require('axios');

function rawURLQuery(url) {
    const index = url.indexOf('?');
    return url.substr(index + 1);
}

const app = express();
const port = process.env.PORT || 3000;

const endpoint = "https://your-project.authgear.cloud"; //replace with your actual Authgear project endpoint
async function userLogin(url_query) {
    const url = `${endpoint}/api/v1/authentication_flows?${url_query}`;

    const input = {
        "type": "login",
        "name": "default"
    };

    const headers = {
        "Content-Type": "application/json"
    }

    try {
        const startLogin = await axios.post(`${url}`, input, {
            headers: headers
        });

        return startLogin;

    }
    catch (error) {
        console.log(error.response);
        return error.response;

    }
}

app.get('/login', async (req, res) => {
    const url_query = rawURLQuery(req.url);
    const apiResponse = await userLogin(url_query);
    res.send(apiResponse.data);
});

app.listen(port, () => {
    console.log(`server started on port ${port}!`);
});

require 'vendor/autoload.php';
use GuzzleHttp\Client;

$endpoint = "https://your-project.authgear.cloud"; //replace with your actual Authgear project endpoint
$url_params = $_SERVER['QUERY_STRING'];
$url = $endpoint . "/api/v1/authentication_flows" . "?" . $url_params;

$client = new Client();
$headers = [
    'Content-Type' => 'application/json',
    'Accept' => 'application/json',
];
$response = $client->post($url, [
    "json" => [
        'type' => 'login',
        'name' => 'default'
    ],
    "headers" => $headers
]);

var_dump($response->getBody());

Note: In order to get the finish_redirect_url at the end of your authentication flow, you must include the value of the entire URL Query generated by Authgear in your initial HTTP request for your authentication flow. The URL Query is a set of parameters that the Authgear authorization server adds to your Custom UI URI when redirecting users to your custom authentication UI.

1.3 Authentication Flow Types

You can specify the kind of authentication flow you wish to initialize using the type parameter in your HTTP request body.

At the moment, the API supports these three values in the type parameter:

signup: The flow to sign up as a new user.
login: The flow to sign in as a new user.
signup_login: This flow will either become a signup or login depending on the input. If the end-user enters an existing login ID, then the flow will become login, otherwise, it is signup.
account_recovery: You can use this type to create a flow like account recovery or password reset.

1.4 State Token

The state token can help you track the state of your authentication flow. Every successful response from the API endpoint includes a stake token. The following is an example of a state token in an HTTP response:

"result": {
    "state_token": "authflowstate_ABCD1234EF56GH8A0KFC998K",
    "type": "login",
    "name": "default",
    "action": {
            "type": "identify",
            "data": {
                "options": [
                    {
                        "identification": "email"
                    }
                ]
            }
        }
}

You can include this state token in the body of your next HTTP request to continue the flow. Below is an example of a request that uses the state token in the above example to continue to the next step of the login type flow.

HTTP Request:

POST /api/v1/authentication_flows/states/input
Content-Type: application/json

{
    "state_token": "authflowstate_ABCD1234EF56GH8A0KFC998K",
    "input": {
        "identification": "email",
        "login_id": "user@example.com"
    }
}

Example:

const express = require('express');
const axios = require('axios');

const app = express();
const port = process.env.PORT || 3000;

const endpoint = "https://your-project.authgear.cloud"; //replace with your actual Authgear project endpoint
async function submitEmailUserLogin(email, state_token) {
    
    const url = `${endpoint}/api/v1/authentication_flows/states/input`;

    const input = {
        "state_token": state_token,
        "input": {
            "identification": "email",
            "login_id": email
        }
    };

    const headers = {
        "Content-Type": "application/json"
    }

    try {
        const submitEmail = await axios.post(`${url}`, input, {
            headers: headers
        });

        return submitEmail;

    }
    catch (error) {
        console.log(error.response);
        return error.response;

    }
}

app.get('/loginStep2', async (req, res) => {
    const apiResponse = await submitEmailUserLogin("pius@oursky.com", "ENTER_VALID_AUTH_STATE");
    res.send(apiResponse.data);
});

app.listen(port, () => {
    console.log(`server started on port ${port}!`);
});

require 'vendor/autoload.php';
use GuzzleHttp\Client;

$endpoint = "https://your-project.authgear.cloud"; //replace with your actual Authgear project endpoint

$url = $endpoint . "/api/v1/authentication_flows/states/input";

$client = new Client();
$headers = [
    'Content-Type' => 'application/json',
    'Accept' => 'application/json',
];
$response = $client->post($url, [
    "json" => [
        "state_token" => "ENTER_VALID_AUTH_STATE",
        "input" => [
            "identification" => "email",
            "login_id" => "user@example.com"
        ]
    ],
    "headers" => $headers
]);

var_dump($response->getBody());

1.5 Input

The Authentication Flow API supports inputs passed in the HTTP requests body as JSON. Some special fields such as type, name and state_token can be passed directly as parameters in the request body. However, other values like user inputs must be passed using the input or batch_input field.

In order to pass inputs that modify the state of the authentication flow, you must make your HTTP requests to the /api/v1/authentication_flows/states/input endpoint instead of /api/v1/authentication_flows.

We've provided the structure for a request with inputs below:

HTTP Request:

POST /api/v1/authentication_flows/states/input
Content-Type: application/json

{
    "state_token": "authflowstate_ABCD1234EF56GH8A0KFC998K",
    "batch_input":
            [
                {
                    "identification": "email",
                    "login_id": "user@example.com"
                },
                {
                    "authentication": "primary_password",
                    "password": "12Hjdusd@o*qfhs$"
                }
            ]
}

From the above schema, notice how the state_token parameter is a direct parameter in the request body. User inputs such as email address and password on the other hand are within the batch_input parameter as elements in an array.

The keys for sending email and password are special words specified by Authgear. Usually, you'll find these keys in the response from the previous step of your authentication flow.

1.6 Response

The structure of the HTTP response from the Authentication Flow API tries to be as consistent as possible all the time. In other words, the structure of responses is always the same. This response is in JSON format.

Successful responses return a 200 HTTP status code and the response body look like this:

{
    "result": {
        "state_token": "authflowstate_ABCD1234EF56GH8A0KFC998K",
        "type": "login",
        "name": "default",
        "action": {
            "type": "authenticate",
            "data": {
                "options": [
                    {
                        "authentication": "primary_password"
                    }
                ],
                "device_token_enabled": false
            }
        }
    }
}

state_token: The token that refers to this particular state of an authentication flow.
type: The type of the authentication flow. Possible values aresignup, login and signup_login.
name: The name of the authentication flow.
action: An object containing information about the next step based on the current request. For example, if we send only identification information (for instance email) in the current request, action.type will be authenticate and action.data will contain information about the enabled authentication methods.
action.data.device_token_enabled: When the value of this field is true, you can send request_device_token: true in your next input to skip 2FA. The action just described is equivalent to checking "Skip 2FA next time on this device" box in AuthUI. Authgear stores device token in the browser cookies to allow skipping of 2FA in the future.

1.6.1 Error Response

The Authentication Flow API returns an HTTP status code within the 400 range when a request is not successful. The following is an example of the body of an error response:

{
  "error": {
    "name": "Unauthorized",
    "reason": "InvalidCredentials",
    "message": "invalid credentials",
    "code": 401,
    "info": {}
  }
}

reason: You can use this string to distinguish between different errors. Do NOT use message as it could change over time.
info: An object containing extra information about the error. It can be absent (i.e. not null, but absent).

2.0 Actions (action.type)

Here, we'll provide details about all the supported action types (action.type) for signup flow and login flow.

This is usually contained in the response from the first step of an authentication flow of type: signup.

HTTP Request:

POST /api/v1/authentication_flows
Content-Type: application/json

{
  "type": "signup",
  "name": "default"
}

When you make the above HTTP request to create a signup flow, you get a response that looks like this:

{
  "result": {
    "state_token": "authflowstate_5R6NM7HGGKV64538R0QEGY9RQBDM4PZD",
    "type": "signup",
    "name": "default",
    "action": {
      "type": "identify",
      "data": {
        "options": [
          {
            "identification": "email"
          },
          {
            "identification": "phone"
          },
          {
            "identification": "oauth",
            "provider_type": "google",
            "alias": "google"
          },
          {
            "identification": "oauth",
            "provider_type": "wechat",
            "alias": "wechat_mobile",
            "wechat_app_type": "mobile"
          }
        ]
      }
    }
  }
}

The action.data.options object in the response contains an array with all the supported identification methods. For example, the presence of { "identification": "email" } means you can continue the above signup flow using an email address to identify the user.

You can select one of the options and then include it in the next step (request) of your authentication flow like this:

"input": {
        "identification": "email",
        "login_id": "user@example.com"
    }

2.2 action.type: create_authenticator

This action requires the UI to create a new authenticator. For example, you can use the create_authenticator action to set a new password for a new user during account creation (signup).

Response:

{
    "result": {
        "state_token": "authflowstate_CCB9PT4EMVDKWKG7KW0ZVBG6JZ28DCK3",
        "type": "signup",
        "name": "default",
        "action": {
            "type": "create_authenticator",
            "data": {
                "options": [
                    {
                        "authentication": "primary_password",
                        "password_policy": {
                            "minimum_length": 8,
                            "history": {
                                "enabled": false
                            }
                        }
                    }
                ]
            }
        }
    }
}

From the above response action.data.options shows that we can use the primary_password authentication method. Learn more about all the authenticators supported by Authgear, in the Authentications section.

To set the primary password for the new user, send the following input in your next request:

"input": {
  "authentication": "primary_password",
  "new_password": "12Hjdusd@o*qfhs$"
}

Sending the above input will complete the signup flow for signup using the primary_password authentication. Hence, the value action.type in response to the next request will be "finished".

If you create an authentication flow of type: login without defining any of input or batch_input, the response to your HTTP request will include action.type:identify.

Below is the structure of a simple HTTP request for creating a login flow.

HTTP Request:

POST /api/v1/authentication_flows
Content-Type: application/json

{
  "type": "login",
  "name": "default"
}

The response for the above HTTP request will look like this:

{
    "result": {
        "state_token": "authflowstate_30AQP46AD1DR219C0SBRNP5NG066R8YG",
        "type": "login",
        "name": "default",
        "action": {
            "type": "identify",
            "data": {
                "options": [
                    {
                        "identification": "email"
                    },
                    {
                        "identification": "oauth",
                        "provider_type": "wechat",
                        "alias": "wechat_mobile",
                        "wechat_app_type": "mobile"
                    }
                ]
            }
        }
    }
}

action.data.options contains a list of all supported identification methods.

You can use one of the options ( "identification": "email") to continue the login flow by passing it in your next request using the input parameter like this:

"input": {
        "identification": "email",
        "login_id": "user@example.com"
        }

2.4 action.type: authenticate

actiontype.type:authenticate is returned in the response for the step that passes an identification option in its request body. The response that includes this action looks like the following:

{
    "result": {
        "state_token": "authflowstate_BAQ271GXCR3NNMR8DW3HTCWNET7TCQR8",
        "type": "login",
        "name": "default",
        "action": {
            "type": "authenticate",
            "data": {
                "options": [
                    {
                        "authentication": "primary_password"
                    }
                ],
                "device_token_enable": false
            }
        }
    }
}

The action.data.options object for the above response contains all the supported authenticators. As you can see, for the above example, only the primary_password authenticator is supported. To learn more about all the authenticators supported by Authgear, check out the Authentications section.

You can pass the authenticator value (user's primary password) in your next request using the input parameter like this:

{
    "state_token": "authflowstate_J4SW4PGVXSZXS95NJAP8F67VZ31V4D0D",
    "input": {
        "authentication": "primary_password",
        "password": "12345678"
    }
}

For a simple login with a primary password only, sending the above request will return action.type: finished which means the authentication flow is completed.

2.5 action.type: verify

The response that includes this action may look like this:

{
  "result": {
    "state_token": "authflowstate_PZMX4FG4N82WGSSY0Y398YH0F9BX4FPX",
    "type": "signup",
    "name": "default",
    "action": {
      "type": "verify",
      "data": {
        "channels": [
          "sms",
          "whatsapp"
        ]
      }
    }
  }
}

To send the OTP for the verification process, use the state token returned in the response to send the following input in your next request:

"state_token": "authflowstate_PZMX4FG4N82WGSSY0Y398YH0F9BX4FPX",
"input": {
  "channel": "sms"
}

The response to the above request should look like this:

{
  "result": {
    "state_token": "authflowstate_ABC123DE45FG1",
    "type": "signup",
    "name": "default",
    "action": {
      "type": "verify",
      "data": {
        "channel": "email",
        "otp_form": "code",
        "masked_claim_value": "john******@example.com",
        "code_length": 6,
        "can_resend_at": "2023-09-21T00:00:00+08:00",
        "can_check": false,
        "failed_attempt_rate_limit_exceeded": false
      }
    }
  }
}

If otp_form is code, an OTP will be sent to the end user at masked_claim_value.

To resend OTP, send another request in a new step with the following input:

"state_token": "authflowstate_ABC123DE45FG1",
"input": {
  "resend": true
}

Next, submit the OTP sent to the user using the following input in your request:

"state_token": "authflowstate_XYZ987AA44Y9",
"input": {
  "code": "000000"
}

Or, you'll get the following response if the OTP form is a link:

{
  "result": {
    "state_token": "authflowstate_IJK567UU1KL889J",
    "type": "signup",
    "name": "default",
    "action": {
      "type": "verify",
      "data": {
        "channel": "email",
        "otp_form": "link",
        "websocket_url": "wss://...",
        "masked_claim_value": "john******@example.com",
        "code_length": 32,
        "can_resend_at": "2023-09-21T00:00:00+08:00",
        "can_check": false,
        "failed_attempt_rate_limit_exceeded": false
      }
    }
  }
}

if otp_form is link, can_check initially is false and websocket_url will be present in data. You can connect to a WebSocket with this URL to listen for the event of the link being approved.
The verification link will be sent to the end user via the email in masked_claim_value. When the user clicks on the link, the default approval page will open.
A WebSocket message of a JSON object {"type": "refresh"} is sent once the user approves the link. Upon receiving the message, you can retrieve a state again.
The retrieved state should have can_check=true.

Now you can pass this input to check if the link has been approved:

"state_token": "authflowstate_IJK567UU1KL889J",
"input": {
  "check": true
}

2.6 action.type: change_password

The response that contains this action looks like this:

{
  "result": {
    "state_token": "authflowstate_MNO876HH96SFF6",
    "type": "login",
    "name": "default",
    "action": {
      "type": "change_password",
      "data": {
        "password_policy": {
          "minimum_length": 8,
          "alphabet_required": true,
          "digit_required": true
        }
      }
    }
  }
}

To submit a new password send the following input in your request:

{
  "new_password": "a.new.password.that.meet.the.password.policy"
}

2.7 action.type: reset_password

The following is a sample of a response that contains this action:

{
  "result": {
    "state_token": "authflowstate_5R6NM7HGGKV64538R0QEGY9RQBDM4PZD",
    "type": "signup",
    "name": "default",
    "action": {
      "type": "reset_password",
      "data": {
        "password_policy": {
          "minimum_length": 8,
          "digit_required": true,
          "history": {
            "enabled": false
          }
        }
      }
    }
  }
}

To complete the password reset process pass the following input:

{
  "new_password": "a.new.password.that.meet.the.password.policy"
}

2.8 Finish Response

This is a special kind of response that is returned at the end of the authentication flow.

Example:

{
  "result": {
    "state_token": "authflowstate_XYZ01234EF56GH8A0KFC998K",
    "type": "login",
    "name": "default",
    "action": {
      "type": "finished",
      "data": {
        "finish_redirect_uri": "https://myapp.authgear.cloud/..."
      }
    }
  }
}

The value for action.type for the finish response is "finished" as this is the end of the authentication flow.
action.data.finish_redirect_uri contains a URL that can be used to hand the authentication process back to Authgear so that it can redirect the user back to the client application. You can hand the authentication process back to Authgear by simply initiating a redirect to the URL in action.data.finish_redirect_uri from your custom authentication UI. See our example of using the finish_redirect_uri to complete a signup flow.

3.0 Input: Identifications

In this section, we'll cover all the supported identification options and how to pass them as input.

3.1 identification: email

Presence in response body:

{
  "identification": "email"
}

Usage in input:

{
  "identification": "email",
  "login_id": "user@example.com"
}

3.2 identification: phone

Presence in response body:

{
  "identification": "phone"
}

Usage in input

{
  "identification": "phone",
  "login_id": "+852980005432"
}

Note: The phone number MUST BE in E.164 format without any separators or spaces.

3.3 identification: username

Presence in response body:

{
  "identification": "username"
}

Usage in input:

{
  "identification": "username",
  "login_id": "johndoe"
}

3.4 identification: oauth

Presence in response:

{
  "identification": "oauth",
  "provider_type": "google",
  "alias": "google"
}

provider_type: The expected value here is a keyword for a specific OAuth provider. Possible values are:
- google
- facebook
- github
- linkedin
- azureadv2
- azureadb2c
- adfs
- apple
- wechat
alias: The identifier of the OAuth provider. You pass this in the input.

Usage in input:

{
  "identification": "oauth",
  "alias": "google",
  "redirect_uri": "<https://example.com/oauth/redirect/google>"
}

The response to an Authentication Flow API request with the above input should look like this:

{
    "result": {
        "state_token": "authflowstate_DVYQP8QXHDXYBNXGPPQZHM0YG3RC4SMH",
        "type": "signup",
        "name": "default",
        "action": {
            "type": "identify",
            "identification": "oauth",
            "data": {
                "alias": "google",
                "oauth_provider_type": "google",
                "oauth_authorization_url": "https://accounts.google.com/o/oauth2/v2/auth?client_id=850158775140-cuov06p5ru3kq27n4bfvrlp3fb7vrpgd.apps.googleusercontent.com&prompt=select_account&redirect_uri=http%3A%2F%2Flocalhost%3A3000&response_type=code&scope=openid+profile+email"
            }
        }
    }
}

In order to continue with the flow, redirect the user to the OAuth provider's authorization page using the link in action.data.oauth_authorization_url.

Once the user successfully grants your application authorization on the OAuth provider's site, they will get an authorization code. This code is usually returned by the provider in your OAuth redirect URL as a code query parameter.

Next, send the authorization code in your next HTTP request to the Authentication Flow API in your input like this:

{
  "code": "<AUTHORIZATION CODE FROM OAUTH PROVIDER>"
}

In some cases, the user may be unable to grant authorization successfully. In such situations, you can continue your authentication flow more gracefully by sending the following error-handling input in your next HTTP request instead:

{
  "error": "{{ error }}",
  "error_description": "{{ error_description }}",
  "error_uri": "{{ error_uri }}"
}

error_description and error_uri are optional.

4.0 Input: Authentications

Here we'll cover all the supported authentication methods (authenticators) and how to pass them as input.

4.1 authentication: primary_password

Presence in response:

{
  "authentication": "primary_password",
  "password_policy": {
    "minimum_length": 8
  }
}

The value of password_policy is an object that contains all the requirements for a password. The following are all the possible attributes for the password_policy object:

{
  "minimum_length": 8,
  "uppercase_required": true,
  "lowercase_required": true,
  "alphabet_required": true,
  "digit_required": true,
  "symbol_required": true,
  "minimum_zxcvbn_score": 4
}

Usage in input (for login flow):

{
  "authentication": "primary_password",
  "password": "some.very.secure.password"
}

Usage in input (for signup flow)

{
  "authentication": "primary_password",
  "new_password": "some.very.secure.password"
}

4.2 authentication: primary_oob_otp_email

Presence in response (for login flow):

{
  "authentication": "primary_oob_otp_email",
  "otp_form": "code",
  "masked_display_name": "john****@example.com",
  "channels": ["email"]
}

In the above response, otp_form tells you what kind of OTP will be sent. masked_display_name tells you what email address the OTP will be sent to. channels tells you the available channels you must choose from.

Presence in response (signup flow):

{
  "authentication": "primary_oob_otp_email"
}

Usage in input (for login flow):

{
  "authentication": "primary_oob_otp_email",
  "index": 1,
  "channel": "email"
}

To reference this authentication, use its index in options array. The next step for using primary_oob_otp_email in your signup flow will be verifying the OTP sent to the user's email.

You can verify the OTP by sending the OTP in the input of the next request for your login flow like this:

"input": {
        "code": "<OTP CODE SENT TO USER VIA EMAIL>"
    }

Usage in input (for signup flow)

{
  "authentication": "primary_oob_otp_email"
}

4.3 authentication: primary_oob_otp_sms

Presence in response (for login flow):

{
  "authentication": "primary_oob_otp_sms",
  "otp_form": "code",
  "masked_display_name": "+8529876****",
  "channels": ["sms", "whatsapp"]
}

otp_form tells you what kind of OTP will be sent. masked_display_name tells you what phone number the OTP will be sent to. channels tells you the available channels you must choose from.

Presence in response (for signup flow):

{
  "authentication": "primary_oob_otp_sms"
}

Usage in input (for login flow):

{
  "authentication": "primary_oob_otp_sms",
  "index": 2,
  "channel": "sms"
}

To reference this authentication, use its index in options array.

The rest of the steps for implementing primary_oob_otp_sms in a login flow is similar to primary_oob_otp_email. The major difference is the change in the channel from email to sms.

Usage in input(for signup flow):

{
  "authentication": "primary_oob_otp_sms"
}

4.4 authentication: secondary_password

Presence in response:

{
  "authentication": "secondary_password",
  "password_policy": {
    "minimum_length": 8
  }
}

Usage in input (for login flow):

{
  "authentication": "secondary_password",
  "password": "some.very.secure.password"
}

Usage in input (for signup flow):

{
  "authentication": "secondary_password",
  "new_password": "some.very.secure.password"
}

4.5 authentication: secondary_oob_otp_email

Presence in response:

{
  "authentication": "secondary_oob_otp_email"
}

Usage in input:

{
  "authentication": "secondary_oob_otp_email",
  "target": "user@example.com"
}

Note: target can be different (and is usually different) from the email address the end-user uses to sign in.

4.6 authentication: secondary_oob_otp_sms

Presence in response:

{
  "authentication": "secondary_oob_otp_sms"
}

Usage in input:

{
  "authentication": "secondary_oob_otp_sms",
  "target": "+85298000032"
}

Note: target MUST BE in E.164 format without any separators or spaces. It can be different (and is usually different) from the phone number the end-user uses to sign in.

4.7 authentication: secondary_totp

Presence in response:

{
  "authentication": "secondary_totp"
}

Usage in input (for login flow)

{
  "authentication": "secondary_totp",
  "code": "<TOTP CODE>"
}

Usage in input (for signup flow):

{
  "authentication": "secondary_totp"
}

Sending "authentication": "secondary_totp" in the input for your signup flow request will return a response that looks like this:

{
    "result": {
        "state_token": "authflowstate_PS3KDB0DZQQ3QZRSM40XWMJPK9NQXZYQ",
        "type": "signup",
        "name": "default",
        "action": {
            "type": "create_authenticator",
            "authentication": "secondary_totp",
            "data": {
                "secret": "ABCDEFGHIJKLM9NOP08R2M7APSXYZ",
                "otpauth_uri": "otpauth://totp/pius1www2@example.com?algorithm=SHA1&digits=6&issuer=https%3A%2F%2Fyour-app.authgear.cloud&period=30&secret=ABCDEFGHIJKLM9NOP08R2M7APSXYZ"
            }
        }
    }
}

You can encode the value of action.data.otpauth_uri into a QR code that users can scan in an Authenticator app. Or display the value of action.data.secretso they can manually enter the secret in the Authenticator app.

To complete the TOTP authentication flow, send the code generated from the Authenticator app in your next request like this:

{
  "code": "<CODE FROM AUTHENTICATOR APP>"
}

5.0 FAQ

5.1 Retrieve a state again

You can use the state token to retrieve more details about an existing state. You can do so by making the following HTTP request:

POST /api/v1/authentication_flows/states
Content-Type: application/json

{
  "state_token": "{{ state_token }}"
}

Typically you do not need this because the state is returned after creation or after input was passed.

PreviousGenerate OTP code NextOAuth 2.0 and OpenID Connect (OIDC)

Last updated 9 months ago

1.0 Introduction

1.1 Endpoints

1.2 Create a New Authentication Flow

What is an Authentication Flow?

1.3 Authentication Flow Types

1.4 State Token

1.5 Input

1.6 Response

1.6.1 Error Response

2.0 Actions (action.type)

2.1 action.type: identify (signup)

2.2 action.type: create_authenticator

2.3 action.type: identify (login)

2.4 action.type: authenticate

2.5 action.type: verify

2.6 action.type: change_password

2.7 action.type: reset_password

2.8 Finish Response

3.0 Input: Identifications

3.1 identification: email

3.2 identification: phone

3.3 identification: username

3.4 identification: oauth

4.0 Input: Authentications

4.1 authentication: primary_password

4.2 authentication: primary_oob_otp_email

4.3 authentication: primary_oob_otp_sms

4.4 authentication: secondary_password

4.5 authentication: secondary_oob_otp_email

4.6 authentication: secondary_oob_otp_sms

4.7 authentication: secondary_totp

5.0 FAQ

5.1 Retrieve a state again